Concrete Mix, Cement, Mortar Mix & Parging

The Marco Concrete Mix is the result of a mixtyre of Portland cement, sand and crushed stone. 

Ideal for sidewalks, foundations or floors. Can be used on projects of 50 mm (2'') in thickness.

Curing time required: 6 hours. Can be walked on after 24 hours.

This product meets ASTM C387 specifications. Resistance after 28 days: 24 Mpa (3500psi).

The Marco Concrete Mix is pre-blended and pre-packaged well proportioned mix of various size aggregates (stone, sand, etc) and Portland Cement. This product offers high strength and resistance and is ideal for the most exigent jobs requiring a minimun thickness of 5 cm (2''). This high performance formulation offers outstanding resistance to freeze-thaw cycles as well as salt and ice melters.

Curing time: 6 hours. Can be walked on 24 hours later.

This product outrank resistance requirement of ASTM C387 standard; Compression strength after 28 days outrank 42 Mpa (6090 psi).

Rich mixture of Portland cement and sand for reparing, steps, walkways, walls and floors.

Ideal for projects of 15 ro 50mm (1/2 to 2 inches).

Curing time: 6 hours. Can be walked on 24 hours later.

The Marco Mortar Mix is a blend of Type N masonry cement and sieved sand. Recommended for a variety of uses such as blocks, bricks and stones above ground.

This product meets ASTM C387 specifications. Resistance after 28 days equals 5 Mpa (750 psi).

The Marco instant concrete mix offers all the advantages of the regular concrete mix and more.

Ideal for the installation of posts, urgent construction and repairs.

Curing time: 30 minutes. Can be walked on 6 hours later.

The Marco instant cement sand product has all the advantages of the regular cement sand mix at a much faster setting time. 

Curing time: 30 minutes. Can be walked on after 6 hours.

A blend of fine sand, high performance cement and polymer for superior strength.

Ideal for reparing imperfections or damaged areas. Product must be applied in very thin coats for repairs such as levelling floors, walls or sidewalks.

General purpose cement (GUL) for all your basic concrete projects. Compressive strength will vary according to the quantity of sand, stone water and cement used.

Recomended Mixture: 
1 part Marco Masonry Cement
3 parts Marco Mortar Sand

Conforms to CSA A3000-08

Ideal for standard bricklaying professional or DIYer.

The parging mix is mainly used as an exterior or interior wall and foundation coating. Can be applied to a cement based surface or wire mesh.

With 3mm (1/8 inch) thickness a bag covers 67 sq.ft.
With 13mm (1/2 inch) thickness a bag covers 15 sq.ft.

Professional mortar mix for laying brick and stone

• Superior adherence
• Better waterproofness
• Higher resistance to freeze-thaw cycles
• Superior workability
• Self healing properties
• Pre-mixed to save time and increase productivity 

Conforms to CSA A170-09

Professional mortar mix for laying block and brick

• Higher compressive strenght
• Superior adherence
• Better waterproofness
• Higher resistance to freeze-thaw cycles
• Superior workability

Conforms to CSA A170-09