Product Data Sheet Safety Data Sheet Show all documents

Sable Marco® Masonry Cement

Type N masonry cement  

Sable Marco® Masonry Cement is a Type N masonry cement designed to provide the required plasticity, workability, water retention, and bond integrity for masonry work. Sable Marco® Masonry Cement is ideal for non-load-bearing, above-grade masonry applications. 

  • Finely textured for easy mixing
  • Excellent workability
  • Good water retention for improved curing
  • Suitable for interior and exterior, above-grade masonry work
Product Data Sheet Safety Data Sheet Show all documents

Usage

Sable Marco® Masonry Cement is ideal for preparing mortars for use in non-load-bearing masonry applications such as laying bricks, blocks, stone veneer, and repointing, as well as for applications requiring moderate strength. It is suitable for both indoor and outdoor use in above-grade construction.  

Advantages

  • Finely textured for easy mixing
  • Excellent workability
  • Good water retention for improved curing
  • Suitable for interior and exterior, above-grade masonry work

Packaging

30 kg (66 lb) bag

Colour

Grey

Product Details

Product Information

Shelf life

12 months in original unopened bag

Storage conditions

Store in a dry, covered area protected from the elements. If the product has been in contact with water or moisture or contains hardened lumps, do not use it.

Density

2,890 kg/m3 (180 lb/ft3)

Application

Application Information

Material temperature

Between 5 °C (40 °F) and 30 °C (86 °F)

Substrate temperature

Between 5 °C (40 °F) and 30 °C (86 °F)

 
Application steps

APPLICATION INSTRUCTIONS

Mix by volume one (1) part of Sable Marco® Masonry Cement with three (3) parts of damp, loose masonry sand. Add clean, potable water gradually while mixing to achieve a workable, plastic consistency. 

Documents